This bachelor thesis is made on behalf of General Electric Healthcare Bio-Sciences AB in Umea. GE Healthcare is a company that produces health care products. One of these products is BioProcess which is used in medical research and the manufacturing of pharmaceuticals. The product often have to be modified since itis soldcustomer modified. There are two different frame sizes. The frames are often tilted 90 degrees to make the modification areas easier to access. The modifications made is mostly trace grooves and holes.The project goal was to create a fixture that fits both frames and will make the modifications made to the frames easier. The fixture should reduce the bodily wear that is caused by modifying these frames. The structure of the fixture must meet requirements of functionality and safety.The result of the project is a fixture that is compatible with both frame sizes. The fixture has been dimensioned with a safety factor of 4. This safety factor was chosen because of the risks in the operations.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:umu-140765 |
| Date | January 2017 |
| Creators | Eriksson, Marcus |
| Publisher | Umeå universitet, Institutionen för tillämpad fysik och elektronik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | Swedish |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | MA ; 1716 |
Page generated in 0.004 seconds