The present work is to develop multifunctional materials with high performance on chemical absorption, adsorption and on acoustic absorption and insulation using natural fiber nonwovens via carbonization and activation. Evaluation of these textile materials includes tensile strength, thermogravimetric analysis, sound absorption and transmission loss, scanning electronic microscopy and surface properties.
Carbonization of cotton nonwoven was carried out in a high temperature oven with nitrogen between 300 °C and 500 °C. The physical activation was undertaken using CO2. The N2 adsorpton isotherm curves of the cotton nonwoven showed the presence of micropores and macropores. High BET surface area and average pore diameters close to micropores were obtained. The comparison between the N2 and CO2 adsorption showed that BET surface area for N2 adsorption is much smaller than that for CO2 adsorption and median pore width for the N2 adsorption is greater than that for CO2 adsorption due to the activated diffusion effects.
Intensive research has been done with an emphasis on how to optimize the method of carbonizing and activating cotton nonwoven. Activated carbon fiber (ACF) made from rayon fabrics showed slightly higher surface area than cotton ACF. The increase of carbonization and activation temperature leads to produce high adsorptive capacity and microporosity. Longer heating time also contributed to high surface area, but widened microporosity and developed mesopores. Surface area of 879.05 m2/g and BJH average diameter of 27.67 Å were achieved when rayon was carbonized and activated at 800 °C for 4 hours. Surface area of cotton ACF was as high as 982.10 m2/g. Chemical activation method was also investigated by impregnation of cotton fabric with ZnCl2, which increased final ACF yield, surface area and developed micropores.
A nonwoven composite of ACF with cotton nonwoven as a base layer was developed. The study concluded that the ACF composite exhibited a greater ability to absorb normal incidence sound waves than the composites with either glassfiber or cotton fiber. The analysis of sound transmission loss revealed that the three composites still obeyed the mass law of transmission loss. The ACF composite exhibited great sound absorption and sound insulation properties.
| Identifer | oai:union.ndltd.org:LSU/oai:etd.lsu.edu:etd-11132008-002553 |
| Date | 19 November 2008 |
| Creators | Jiang, Nan |
| Contributors | Jonathan (Yan) Chen, Jenna Kuttruff, Ioan Negulescu, Kevin S. McCarter, Robert Laird, Kent Mathewson |
| Publisher | LSU |
| Source Sets | Louisiana State University |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lsu.edu/docs/available/etd-11132008-002553/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached herein a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to LSU or its agents the non-exclusive license to archive and make accessible, under the conditions specified below and in appropriate University policies, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0109 seconds