This master's thesis deals with optimization of conditions of chemical hydride generation of tellurium and conditions of its atomization, specifically in three types of atomizers - in a diffusion flame (DF), in a heated multiple microflame quartz tube atomizer (MMQTA) and in a dielectric barrier discharge (DBD) atomizer. Tellurium hydride was generated in a flow injection arrangement and a high-resolution continuum source atomic absorption spectrometer was used for detection. As hydride generation can be only done from tetravalent species of tellurium, at first a simple procedure of pre-reduction of hexavalent species of tellurium by heating a standard in hydrochloric acid at 6 mol dm-3 was verified. Further, conditions of chemical generation were optimized with a goal to achieve as high generation efficiency as possible, namely, concentration of hydrochloric acid and sodium tetrahydroborate, volume of the reaction coil and a flow rate of carrier gas. Subsequently, conditions of atomization of tellurium hydride were examined with chosen optimal generation conditions. In the case of DF, it was an amount of hydrogen in the flame, a total flow rate of gases and observation height. In the case of MMQTA, temperature of the atomizer, a flow rate of carrier gas and a flow rate of air or oxygen needed for...
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:397553 |
| Date | January 2019 |
| Creators | Bufková, Kateřina |
| Contributors | Musil, Stanislav, Matoušek, Tomáš |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0024 seconds