For the first time nonwoven fibrous scaffolds were electrospun from a low molar mass gemini ammonium surfactant, N,N–-didodecyl-N,N,N–,N–-tetramethyl-N,N–-ethanediyl-di-ammonium dibromide (12-2-12). Cryogenic transmission electron microscopy (cryo-TEM) and solution rheological experiments revealed micellar morphological transitions of 12-2-12 in water and water:methanol (1:1 vol). Electrospinning efforts of 12-2-12 from water did not produce fibers at any concentration, however, electrospinning 12-2-12 in water:methanol at concentrations greater than 2C* produced, hydrophilic continuous fibers with diameters between 0.9 and 7 μM.
Photo-reactive surfactants were synthesized to electrospin robust surfactant membranes. Before electrospinning it was important to fundamentally understand the structure-property relationship of gemini surfactants. The thermal and solution properties were explored for a series of ammonium gemini surfactants using differential scanning calorimetry (DSC), polarized light microscopy (PLM), and conductivity experiments. The Kraft temperature (Tk) was measured in water and water:methanol (1:1 vol) to investigate the influence of solvent on the surfactant solution properties.
Other experiments investigate how associated photo-curable architectures are applicable in macromolecular architectures, to gain a fundamental understanding of how hydrogen bonding associations influence the photo-reactivity of functionalized acrylic copolymers. Novel hot melt pressure sensitive adhesives (HMPSAs) were developed from acrylic terpolymers of 2-ethylhexyl acrylate (EHA), 2-hydroxyethyl acrylate (HEA), and methyl acrylate (MA) functionalized with hydrogen bonding and photo-reactive functionalities. The synergy of hydrogen bonding and photo-reactivity resulted in higher peel values and rates of cinnamate photo-reactivity with increasing urethane concentration.
Random copolymers of poly(n-butyl acrylate (nBA)-co-2-hydroxyethyl methacrylate (HEMA)) were functionalized with hydrogen bonding and photo-reactive groups to explore the photo-curing of associated macromolecular architectures. The influence of urethane hydrogen bonding on the photo-reactivity of cinnamate-functionalized acrylics was investigated with photo-rheology and UV-vis spectroscopy. Cinnamate-functionalized samples displayed an increase in modulus with exposure time, and the percentage increase in modulus decreased as the urethane content increased. The synergy of hydrogen bonding and photo-reactive groups resulted in higher rates of cinnamate photo-reactivity with increasing urethane concentration.
Electrospun fibers were in situ photo-crosslinked to develop fibrous membranes from cinnamate functionalized low Tg acrylics. Electrospinning was conducted approximately 55 °C above the Tg of the cinnamate acrylate and the electrospun fibers did not retain their fibrous morphology without photo-curing. However, electrospun fibers were collected that retained their fibrous morphology and resisted flow when in situ photo-cured during electrospinning. The intermolecular photo-dimerization of cinnamates resulted in a network formation that prevented the low Tg cinnamate acrylate from flowing. / Ph. D.
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/27714 |
Date | 11 June 2009 |
Creators | Cashion, Matthew Paul |
Contributors | Chemistry, Long, Timothy E., Moore, Robert Bowen, Turner, S. Richard, Davis, Richey M., Madsen, Louis A. |
Publisher | Virginia Tech |
Source Sets | Virginia Tech Theses and Dissertation |
Detected Language | English |
Type | Dissertation |
Format | application/pdf |
Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Relation | MatthewCashionDissertation.pdf |
Page generated in 0.0022 seconds