Return to search

Predispersed solvent extraction

A new solvent extraction method has been developed for the extraction of metal and organic ions from very dilute aqueous solutions. The new method, which has been named Predispersed Solvent Extraction (POSE), is based on the principle that 1 there is no need to comminute both phases. All that is necessary is to comminute the solvent phase prior to contacting it with the feed. This is done by converting the solvent into aphrons, which are micron-sized globules encapsulated in a soapy film. Since the aphrons are so small, it takes a long time for the solvent to rise to the surface under the influence of gravity alone. Therefore, the separation is expedited by piggy-back flotation of the aphrons on specially prepared gas bubbles, which are somewhat larger than aphrons and are called colloidal gas aphrons (CGA).

Copper, uranium and chromium ions, and alizarin yellow were extracted from very dilute aqueous solutions using PDSE. Tests were performed in a vertical glass column in both batch and continuous modes, and in a continuous horizontal trough. The new solvent extraction procedure worked very efficiently and very quickly under laboratory conditions. Higher than 99% extraction was achieved in many of the tests performed. / Master of Science

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/45173
Date13 October 2010
CreatorsRodarte, Alma Isabel MarĂ­n
ContributorsChemical Engineering, Sebba, Felix, Michelsen, Donald L., Beyer, Gerhard H.
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
Detected LanguageEnglish
TypeThesis, Text
Formatix, 109 leaves, BTD, application/pdf, application/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/
RelationOCLC# 18959327, LD5655.V855_1988.R636.pdf

Page generated in 0.0136 seconds