Return to search

PRODUCTION STRATEGIES FOR MARINE HYDRATE RESERVOIRS

Large quantities of natural gas hydrate are present in marine sediments along the coastlines of
many countries as well as in arctic regions. This research is aimed at assessing production of
natural gas from the marine deposits. We had developed a multiphase, multicomponent, thermal,
3D simulator in the past, which can simulate production of hydrates both in equilibrium and
kinetic modes. Four components (hydrate, methane, water and salt) and five phases (hydrate, gas,
aqueous-phase, ice and salt precipitate) are considered in the simulator. In this work, we simulate
depressurization and warm water flooding for hydrate production in a hydrate reservoir underlain
by a water layer. Water flooding has been studied as a function of injection temperature, injection
pressure and production pressure. For high injection temperature, the higher pressure increases the
flow of warm water (heat) in the reservoir making the production rate faster, but if injection
temperature is not high then only depressurization is the best method of production. At
intermediate injection temperature, the production rate changes non-monotonically with the
injection pressure.

Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:BVAU.2429/1174
Date07 1900
CreatorsPhirani, J., Mohanty, K. K.
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
LanguageEnglish
Detected LanguageEnglish
Typetext
RightsPhirani, J.; Mohanty, K.K.

Page generated in 0.0019 seconds