Return to search

Blasting Design Using Fracture Toughness and Image Analysis of the Bench Face and Muckpile

Few studies of blasting exist because of difficulties in obtaining reliable fragmentation data or even obtaining consistent blasting results. Many researchers have attempted to predict blast fragmentation using the Kuz-Ram model, an empirical fragmentation model suggested by Cunningham.

The purpose of this study is to develop an empirical model to relate specific explosives energy (ESE) to blasting fragmentation reduction ratio (RR) and rock fracture toughness (KIC).

The reduction ratio was obtained by analyzing the bench face block size distribution and the muck fragment size distribution using image analysis. The fracture toughness was determined using the Edge Notched Disk Wedge Splitting test.

Blasting data from twelve (12) blasts at four (4) different quarries were analyzed. Based on this data set, an empirical relationship, ESE=11.7 RR801.202 KIC4.14 has been developed. Using this relationship, based on the predicted blasting energy input for a desired eighty-percent passing (P80) muckpile fragment size the burden and spacing may be determined. / Master of Science

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/34582
Date21 September 2006
CreatorsKim, Kwangmin
ContributorsMining and Minerals Engineering, Westman, Erik C., Novak, Thomas, Karfakis, Mario G.
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
Detected LanguageEnglish
TypeThesis
Formatapplication/octet-stream, application/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/
RelationMin_model.alz, Min_Thesis.pdf

Page generated in 0.0123 seconds