As well as the many benefits associated with the evolution of multispectral sensors into hyperspectral sensors there is also a considerable increase in storage space and the computational load to process the data. Consequently the remote sensing ommunity is investigating and developing statistical methods to alleviate these problems. / The research presented here investigates several approaches to reducing the dimensionality of hyperspectral remotely sensed data while maintaining the levels of accuracy achieved using the full dimensionality of the data. It was conducted with an emphasis on applications in maximum likelihood classification (MLC) of hyperspectral image data. An inherent characteristic of hyperspectral data is that adjacent bands are typically highly correlated and this results in a high level of redundancy in the data. The high correlations between adjacent bands can be exploited to realise significant reductions in the dimensionality of the data, for a negligible reduction in classification accuracy. / The high correlations between neighbouring bands is related to their response functions overlapping with each other by a large amount. The spectral band filter functions were modelled for the HyMap instrument that acquires hyperspectral data used in this study. The results were compared with measured filter function data from a similar, more recent HyMap instrument. The results indicated that on average HyMap spectral band filter functions exhibit overlaps with their neighbouring bands of approximately 60%. This is considerable and partly accounts for the high correlation between neighbouring spectral bands on hyperspectral instruments. / A hyperspectral HyMap image acquired over an agricultural region in the south west of Western Australia has been used for this research. The image is composed of 512 × 512 pixels, with each pixel having a spatial resolution of 3.5 m. The data was initially reduced from 128 spectral bands to 82 spectral bands by removing the highly overlapping spectral bands, those which exhibit high levels of noise and those bands located at strong atmospheric absorption wavelengths. The image was examined and found to contain 15 distinct spectral classes. Training data was selected for each of these classes and class spectral mean and covariance matrices were generated. / The discriminant function for MLC makes use of not only the measured pixel spectra but also the sample class covariance matrices. This thesis first examines reducing the parameterization of these covariance matrices for use by the MLC algorithm. The full dimensional spectra are still used for the classification but the number of parameters needed to describe the covariance information is significantly reduced. When a threshold of 0.04 was used in conjunction with the partial correlation matrices to identify low values in the inverse covariance matrices, the resulting classification accuracy was 96.42%. This was achieved using only 68% of the elements in the original covariance matrices. / Both wavelet techniques and cubic splines were investigated as a means of representing the measured pixel spectra with considerably fewer bands. Of the different mother wavelets used, it was found that the Daubechies-4 wavelet performed slightly better than the Haar and Daubechies-6 wavelets at generating accurate spectra with the least number of parameters. The wavelet techniques investigated produced more accurately modelled spectra compared with cubic splines with various knot selection approaches. A backward stepwise knot selection technique was identified to be more effective at approximating the spectra than using regularly spaced knots. A forward stepwise selection technique was investigated but was determined to be unsuited to this process. / All approaches were adapted to process an entire hyperspectral image and the subsequent images were classified using MLC. Wavelet approximation coefficients gave slightly better classification results than wavelet detail coefficients and the Haar wavelet proved to be a more superior wavelet for classification purposes. With 6 approximation coefficients, the Haar wavelet could be used to classify the data with an accuracy of 95.6%. For 11 approximation coefficients this figure increased to 96.1%. / First and second derivative spectra were also used in the classification of the image. The first and second derivatives were determined for each of the class spectral means and for each band the standard deviations were calculated of both the first and second derivatives. Bands were then ranked in order of decreasing standard deviation. Bands showing the highest standard deviations were identified and the derivatives were generated for the entire image at these wavelengths. The resulting first and second derivative images were then classified using MLC. Using 25 spectral bands classification accuracies of approximately 96% and 95% were achieved using the first and second derivative images respectively. These results are comparable with those from using wavelets although wavelets produced higher classification accuracies when fewer coefficients were used.
| Identifer | oai:union.ndltd.org:ADTP/244309 |
| Date | January 2007 |
| Creators | Santich, Norman Ty |
| Publisher | Curtin University of Technology, School of Applied Science. |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | unrestricted |
Page generated in 0.0024 seconds