The master’s thesis is focused on the analysis and modeling of power line communication with aim to implement power line channel simulator in the programming environment Matlab. At the beginning of the thesis are summarized basic information about the PLC communication, its basic distribution in terms of frequency bands and are also mentioned advantages and disadvantages. The emphasis on the meaning and importance of modeling with the aim to analyze PLC communication channel is specified further. The following is a detailed description of the current power lines communication models. Power line channel simulator was created on the basis of mathematical analysis for low-voltage (LV) distribution networks. The created simulator uses a model of cascaded two-ports and works in random or fixed mode. Input parameters are real topologies, different types of loads and cables. RLC resonant circuit as a frequency selective impedance is also included in impedance models. Based on the obtained results was performed the analysis, determined the critical parameters and extreme values. Comparison of effectiveness of created simulator was processed on the basis of available simulators from other authors. Two versions of simulator were created using the results obtained under comparison of effectiveness. For comparison was also performed real measurement on a simple topology. The experimental measurements results have been implemented in the simulator.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:220587 |
| Date | January 2014 |
| Creators | Jedlička, Tomáš |
| Contributors | Fujdiak, Radek, Mlýnek, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Slovak |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds