Return to search

Nastavení výrobního procesu za účelem minimalizace tvorby voidů v pájce při použití slitiny SAC305 / Precise setup of production process to minimalize presence of voids in solder joints where were used alloy SAC305

The theoretical part of dissertation is devoted to familiarization with the process of assembly and soldering of PCBs. There are described the selected types of lead-free solder paste, the various procedures of flux deposition, where the greater part is focuses to the printing through template. Also, I analyze the different procedures shouldering and soldering. I focused mainly on the mechanical mounting of SMD components soldering with help convection reflow and soldering in the vapor. In the practical part is described the design of the test PCB, methodology of assembly PCB and soldering various technologies with predefined settings. The analysis of the results is done by a non-destructive x-ray method and destructive micro-cut method. The x-ray method detects the position and size of the voids in the solder. This information is used for faster processing of micro-cut. The micro-cut method is included in the analysis for a more detailed examination of the solder joint. At the end of the thesis, there is a summary of the recommendation that the setting of the manufacturing process increases the quality of the brazed joint.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:377344
Date January 2018
CreatorsSlavík, Pavel
ContributorsMacho, Tomáš, Valach, Soběslav
PublisherVysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0018 seconds