Classical series production induction motors are usually adequate to most of the industrial application by range of rpm. For application requiring higher speed is traditionally used gearbox which is between motor and driven equipment. Nowadays, where are settings demands on efficiency operations and the most easily maintainance, so aim is to join driven equipment narrow with motors. When operating motors over 3000 rpm there are some proper problems. Generally, there is higher losses due to supply voltage from frequency converters and mechanically strength of rotor. This thesis provides a view on existing solutions of high speed induction machines. In the text there are mentioned options of using laminated rotor and solid rotor. Due to regard to angular speed of rotor there are mentioned the most important equations and knowledge, which are related to a mechanical strength of used materials and dimensions of machines. Later on is there mentioned groundwork, which when we are respecting them, we may improve the efficiency of machine. In this thesis is mentioned design, analyses and manufacturing process of high speed induction motor with solid rotor and copper layer at the surface. After that there are simulation of electromagnetic field through the use of finite element method in program FEMM. In the last chapter there are presented measured data of manufactured high speed motor and they are compared with calculations.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:219182 |
| Date | January 2011 |
| Creators | Klusáček, Jiří |
| Contributors | Ondrůšek, Čestmír, Vítek, Ondřej |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0133 seconds