Inductively Coupled Plasma (ICP) facilities create high enthalpy ows to recreate atmospheric entry conditions. Although no condition has been duplicated exactly in a ground test facility, it is important to characterize the condition to understand how close a facility can come to doing so. An ICP facility was constructed at the University of Vermont for aerospace material testing in 2010. The current setup can operate using air, carbon dioxide, nitrogen, and argon to test samples in a chamber. In this work we investigate di erent ways to increase measured heat ux and expand our facility to operate supersonically. To do so, a water cooled injection system was designed to overcome failure points of the prior system. An investigation of heat ux methods that provide a baseline for the facility were also examined and tested. A nozzle con guration was also developed with an overall goal of increasing the plasma ow to reach sonic and supersonic velocities, allowing it to be compared with the existing subsonic system. An iterative approach was taken to develop a nozzle design that is robust enough to handle the harsh environment, yet adaptable to the pre-existing facility components. The current design uses interchangeable sonic and supersonic nozzles which also allow for appropriate plasma gas expansion. Data are taken through retractable and goose-neck probe sample holders during testing. Heat ux can be determined by use of a Gardon gage, slug calorimeter, and water cooled calorimeter. Total and static pressure are determined from a pitot tube and pressure tap, which are then manipulated into a velocity measurement. A comparison between subsonic and supersonic operation is then made with these data. Existing literature uses correlations between jet diameter and velocity gradients to determine the e ective heat ux. This investigation found that the experimental and theoretical heat ux results scale correctly according to the correlations.
| Identifer | oai:union.ndltd.org:uvm.edu/oai:scholarworks.uvm.edu:graddis-1217 |
| Date | 19 September 2013 |
| Creators | Smith, Silas |
| Publisher | ScholarWorks @ UVM |
| Source Sets | University of Vermont |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Graduate College Dissertations and Theses |
Page generated in 0.0019 seconds