<p>High-level process planning plays an important role in determining candidate process domains at the configuration design stage. Changing the processes domainslater increases the product development cycle and the product development cost. Therefore, determining the most appropriate manufacturing processes at thebeginning stages of the design process becomes critical. However, high-level process planning systems have traditionally lacked integration of design synthesis anddesign evaluation. The main objective of this research has been to develop a FEature-Based Design And Process Planning (FEBDAPP) system that helps designers decide whether ornot the design is worth pursuing by providing manufacturing advice to designers during the design process. In order to achieve the main objective, the following taskshave been accomplished: (1) developed a hybrid system incorporating design by feature and feature recognition approaches capable of reducing the complexity offeature recognition algorithms without sacrificing flexibility in creating a part design, (2) developed a comprehensive set of feature mapping algorithms capable oftransforming a primary part representation into a secondary part representation that is required as input to downstream applications, and (3) developed aCAD-based interface capable of integrating a current CAD system with a high-level process planning system.This research contributes significantly to the availability of early design tools that enhance and at the same time shorten the design process cycle. The implementationof feature technology in this research will support the development of applications such as tooling cost estimation and manufacturability analysis. Finally, theFEBDAPP system is intended to be an effective concurrent engineering tool that bridges the gap between design and manufacturing.<P>
| Identifer | oai:union.ndltd.org:NCSU/oai:NCSU:etd-20010711-140320 |
| Date | 12 July 2001 |
| Creators | Febransyah, Ade |
| Contributors | Dr. Ezat T. Sanii, Dr. Denis R. Cormier, Dr. Michael G. Kay, Dr. Fen Wu |
| Publisher | NCSU |
| Source Sets | North Carolina State University |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://www.lib.ncsu.edu/theses/available/etd-20010711-140320 |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to NC State University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0024 seconds