This thesis reports on a quantitative exposure assessment and on an analysis of the attributes of the data used in the estimations, in particular distinguishing between its uncertainty and variability.
A retrospective assessment of exposure to benzene was carried out for a case control study of leukaemia in the Australian petroleum industry. The study used the mean of personal task-based measurements (Base Estimates) in a deterministic algorithm and applied factors to model back to places, times etc for which no exposure measurements were available. Mean daily exposures were estimated, on an individual subject basis, by summing the task-based exposures. These mean exposures were multiplied by the years spent on each job to provide exposure estimates in ppm-years. These were summed to provide a Cumulative Estimate for each subject.
Validation was completed for the model and key inputs.
Exposures were low, most jobs were below TWA of 5 ppm benzene. Exposures in terminals were generally higher than at refineries. Cumulative Estimates ranged from 0.005 to 50.9 ppm-years, with 84 percent less than 10 ppm-years.
Exposure probability distributions were developed for tanker drivers using Monte Carlo simulation of the exposure estimation algorithm. The outcome was a lognormal distribution of exposure for each driver. These provide the basis for alternative risk assessment metrics e.g. the frequency of short but intense exposures which provided only a minimal contribution to the long-term average exposure but may increase risk of leukaemia.
The effect of different inputs to the model were examined and their significance assessed using Monte Carlo simulation. The Base Estimates were the most important determinant of exposure in the model. The sources of variability in the measured data were examined, including the effect of having censored data and the between and within-worker variability. The sources of uncertainty in the exposure estimates were analysed and consequential improvements in exposure assessment identified.
Monte Carlo sampling was also used to examine the uncertainties and variability associated with the tanker drivers' exposure assessment, to derive an estimate of the range and to put confidence intervals on the daily mean exposures. The identified uncertainty was less than the variability associated with the estimates.
The traditional approach to exposure estimation typically derives only point estimates of mean exposure. The approach developed here allows a range of exposure estimates to be made and provides a more flexible and improved basis for risk assessment.
Identifer | oai:union.ndltd.org:ADTP/217079 |
Date | January 1999 |
Creators | Glass, Deborah Catherine, mikewood@deakin.edu.au |
Publisher | Deakin University. School of Biological and Chemical Sciences |
Source Sets | Australiasian Digital Theses Program |
Language | English |
Detected Language | English |
Rights | http://www.deakin.edu.au/disclaimer.html), Copyright Deborah Catherine Glass |
Page generated in 0.0025 seconds