The master thesis deals with the design of the injection mold for the production of a plastic two-part worm which is part of the worm gear set in the sleeve. From the beginning, an analysis of the assigned component was performed, specifying its function and specifying the criteria that must be met by the component. In addition, design of the production technology (injection molding) was carried out, followed by theoretical analysis of plastic materials, injection molding technology and mold design. Subsequently, in the practical part, a complete design of the injection mold was made on the basis of simulations and technological calculations. On the basis of the parameters of the injection mold, a machine was chosen, on which production should be carried out according to the proposed technological procedure. The conclusion of the thesis contains a technical and economic evaluation of the proposed technology for the production of Plastics splatter component.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:318849 |
Date | January 2017 |
Creators | Petrucha, Roman |
Contributors | Kebrle, Ondřej, Kandus, Bohumil |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds