Several challenges are still holding back the technological transfer of printed electronics to industry in spite of recent progresses. In this thesis work, the printing method of inks based on silver nanoparticles (<Ø>=25 nm) was optimized according to its rheology and to the fluid/substrate interactions for the fabrication of electrical interconnections with a thickness of 500 nm. These lines were printed on silicon or flexible substrates and annealed either by conventional (oven or infrared) or selective methods (microwave) at temperatures comprised between 100 and 300 °C.A better understanding of the relationship between process and microstructure of these printed thin films, based on several crystallographic equipments (XRD, EBSD and EDX), led to the optimization of nanocrystallites growth with an activation energy of about 3 to 5 kJ*mol-1. In addition to the low residual stress (70 MPa), this optimization is used to achieve low electrical resistivity (3.4 μOhm*cm) associated with a greater coherence of the crystal lattices at grain boundaries. The probability of electron scattering at such interfaces can be further reduced using an innovative approach of oriented crystallite growth by atomic interdiffusion from the substrate.The low mechanical stiffness (E<50 GPa) of these porous lines requires a reinforcement step either by crystalline texturation or by electroless growth to withstand the assembly and wire-bonding steps. The fabrication of a functional demonstrator thus validated the printing technology for the manufacture of electronic components.
| Identifer | oai:union.ndltd.org:CCSD/oai:tel.archives-ouvertes.fr:tel-00847021 |
| Date | 07 February 2012 |
| Creators | Cauchois, Romain |
| Publisher | Ecole Nationale Supérieure des Mines de Saint-Etienne |
| Source Sets | CCSD theses-EN-ligne, France |
| Language | English |
| Detected Language | English |
| Type | PhD thesis |
Page generated in 0.0017 seconds