Made available in DSpace on 2014-12-17T14:07:05Z (GMT). No. of bitstreams: 1
YaraFG_DISSERT.pdf: 4146827 bytes, checksum: 3586f66a1b391a184d1b6034e91b85c0 (MD5)
Previous issue date: 2012-12-20 / In the ceramics industry are becoming more predominantly inorganic nature pigments. Studies in this area allow you to develop pigments with more advanced properties and qualities to be used in the industrial context. Studies on synthesis and characterization of cobalt aluminate has been widely researched, cobalt aluminate behavior at different temperatures of calcinations, highlighting especially the temperatures of 700, 800 and 900? C that served as a basis in the development of this study, using the method of polymerization of complex (CPM), economic, and this method applied in ceramic pigment synthesis. The procedure was developed from a fractional factorial design 2 (5-2) in order to optimize the process of realization of the cobalt aluminate (CoAl2O4), having as response surfaces the batch analysis data of Uv-vis spectroscopy conducted from the statistic software 7.0, for this were chosen five factors as input variables: citric acid (stoichiometric manner), puff or pyrolysis time (h), temperature (? C), and calcinations (? C/min), at levels determined for this study. By applying statistics in the process of obtaining the CoAl2O4 is possible the study of these factors and which may have greater influence in getting the synthesis. The pigments characterized TG/DSC analyses, and x-ray diffraction (XRD) and scanning electron microscope (SEM/EDS) in order to establish the structural and morphological aspects of pigment CoAl2O4, among the factors studied it were found to statically with increasing calcinations temperature 700?< 800 <900 ?C, the bands of Uv-vis decrease with increasing intensity of absorbance and that with increasing time of puff or pyrolysis (h) there is an increase in bands of Uv-vis proportionally, the generated model set for the conditions proposed in this study because the coefficient of determination can explain about 99.9% of the variance (R?), response surfaces generated were satisfactory, so it s possible applicability in the ceramics industry of pigments / Na ind?stria cer?mica utilizam-se cada vez mais pigmentos de natureza predominantemente inorg?nica. Os estudos nessa ?rea permitem desenvolver pigmentos com qualidades e propriedades mais avan?adas para serem empregados em ?mbito industrial. Estudos de s?ntese e caracteriza??o do aluminato de cobalto t?m sido amplamente pesquisados, o comportamento do aluminato de cobalto em diferentes temperaturas de calcina??es, destacando principalmente as temperaturas de 700, 800 e 900?C utilizando o m?todo de polimeriza??o de complexos (MPC), m?todo este, econ?mico e aplicado em s?ntese de pigmentos cer?micos. O procedimento foi desenvolvido a partir de um planejamento fatorial fracionado 2(5-2) com o objetivo de otimizar o processo de realiza??o do aluminato de cobalto (CoAl2O4), tendo como superf?cies de respostas os dados da an?lise de espectroscopia do Uv-vis realizados a partir do software statistic 7.0, para isso, foram escolhidos cinco fatores como vari?veis de entrada: concentra??es de ?cido c?trico (de maneira estequiom?trica), tempo de puff ou pir?lise (h), temperatura (?C), tempo e taxas de calcina??es(?C/min), em patamares determinados para este estudo. Atrav?s da aplica??o estat?stica no processo de obten??o do CoAl2O4 foi poss?vel estudar entre estes fatores quais possam ter maior influ?ncia na obten??o da s?ntese. Os p?s-precursores foram caracterizados pelas an?lises termogravim?tricas TG/DSC, e os p?s-calcinados (pigmentantes) foram analisados pela difra??o de raios- x (DRX) e microscopia eletr?nica de varredura com energia dispersiva (MEV/EDS) a fim de comprovar os aspectos estruturais e morfol?gicos do CoAl2O4, entre os fatores estudados estaticamente verificou-se que com o aumento da temperatura de calcina??o 700<800<900?C, as bandas do Uv-vis diminuem com o aumento da intensidade da absorb?ncia e que com o aumento do tempo de puff ou pir?lise (h) h? um aumento das bandas do Uv-vis proporcionalmente, o modelo gerado ajustou-se para as condi??es propostas neste estudo, pois o coeficiente de determina??o consegue explicar cerca de 99,9%, da vari?ncia (R?), as superf?cies de respostas geradas foram satisfat?rias, sendo assim sua poss?vel aplicabilidade na ind?stria cer?mica de pigmentos
| Identifer | oai:union.ndltd.org:IBICT/oai:repositorio.ufrn.br:123456789/12768 |
| Date | 20 December 2012 |
| Creators | Gomes, Yara Feliciano |
| Contributors | CPF:06296687877, http://lattes.cnpq.br/2365059843175411, Motta, Fabiana Villela da, CPF:24779953839, http://lattes.cnpq.br/9918299069511517, Galdino, Jos? Nildo, CPF:87555492415, http://lattes.cnpq.br/3713583703008385, Paskocimas, Carlos Alberto |
| Publisher | Universidade Federal do Rio Grande do Norte, Programa de P?s-Gradua??o em Ci?ncia e Engenharia de Materiais, UFRN, BR, Processamento de Materiais a partir do P?; Pol?meros e Comp?sitos; Processamento de Materiais a part |
| Source Sets | IBICT Brazilian ETDs |
| Language | Portuguese |
| Detected Language | English |
| Type | info:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis |
| Format | application/pdf |
| Source | reponame:Repositório Institucional da UFRN, instname:Universidade Federal do Rio Grande do Norte, instacron:UFRN |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0022 seconds