The PWM (pulse-width-modulated) type voltage source converters (VSC) allow a precise speed control of induction motors with maximum achievable energy efficiency. However, the rapid growth of this technology has created quite a concern, as the PWM waveform produces complex transients that stress the motor insulation, to much severe levels, compared to the normal sinusoidal voltage waveforms. As a result, the machine may fail prematurely due to increased dielectric heating; high turn-to-turn stress caused by non-linear potential distributions; increased partial discharge (PD) activities due to overshoots in pulse waveforms; and built-up space charge by high frequency signals. The present work therefore addresses the problems associated with enamelled wires and groundwall insulation in motor stator coil working under PWM-VSC.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OWTU.10012/3052 |
| Date | January 2007 |
| Creators | Haq, Saeed UL |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | Thesis or Dissertation |
| Format | 5838954 bytes, application/pdf |
Page generated in 0.0015 seconds