Diploma thesis deals with the problems of system installations. The system installation is presented as an installation, where the light switch does not serve for interrupt a power circuit, but it serves as a sensor, which directs the status change of actuator, that makes the own manipulation with a power circuit. In the first chapter the diploma thesis presents the history of the system installation development depending on the demand for the system regulation in buildings centrally and complexly. There are also summarize advantages and disadvantages of installations, which are used in these days. In the second chapter, the system installations are devided into centralized and decentralized systems. The centralized systems are constructionally simpler as well the communication, but the whole system is more inclinable to fail. The decentralized systems are more complicated, more expensive, but more reliable and they have also potentiality to extand. Two decentralized systems, nowadays the most used, are further presented – KNX and LonWorks. They are used especially for the administration buildings control. Then the diploma thesis presents both some systems, which are used abroad, and the situation at the Czech market, whereas there is described the system INELS, which is made by Elko ep. Limited Company. The goal of the thesis, which is mentioned in the third chapter, is to present the system installations, design a panel with this installation including the panel´s handmade, and then on this panel demonstrate the panel´s using for education in laboratory practices. The fourth chapter discusses the author´s characterization of the panel´s concept – there is described the graphical concept of the panel, used units and their integrations. By all of used units their functions on the panel are described. In the last but one chapter, there are mentioned the practical applications, which the panel serves, and there are also described the concepts of laboratory tasks for education of the fundamental configuration and possibilities of the system installation INELS. The chapter also engage in the configuration of the system for the panel, which presents control elements in one room via the system installation INELS. This configuration serves for the presentation of the educational panel. The conclusion is dedicated to the summary of the mentioned problems.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:218533 |
| Date | January 2010 |
| Creators | Steidl, Jaromír |
| Contributors | Bátora, Branislav, Macháček, Jan |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds