The Digital Micromirror Device (DMD) technology has been developed especially for Digital Light Processing projectors, which allow the image projection. After this succesful implementation, and thanks to the commercial availibility and low initial cost of the DMD chip, a wide range of other applications became possible. Besides, it may be used in microscopy as a spatial light modulator. For example in Coherence-Controlled Holographic Microscope (CCHM) that finds its use especially for imaging and measurement of live-cell dynamic processes. The DMD chip placed in the illumination part of CCHM allows for broadening the application possibilities. Namely it could be different illumination mode experiments or tomographic applications. The master's thesis deals with the optical design of CCHM with digital optics, i. e. DMD chip. The selection of optical elements for CCHM, the experimental verification of the imaging setup and the process of designing the illumination part are described in detail. In the end, the analysis of different designs for illumination setup with the digital optics in object arm is carried out and the results are compared.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:392857 |
Date | January 2018 |
Creators | Vavřinová, Jana |
Contributors | Jákl, Petr, Dostál, Zbyněk |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds