Return to search

Creation of an Internal State Variable Plasticity-Damage-Corrosion Model Validated by Experiments with Magnesium Alloys

In this study, a new consistent formulation coupling kinematics, thermodynamics, and kinetics with damage using an extended multiplicative decomposition of the deformation gradient that accounts for corrosion effects is presented. The technical approach used for modeling the corrosion behavior of magnesium alloys was divided into three primary steps. First, a predictive corrosion model was developed based on experimental corrosion observations. The experimentally-observed corrosion mechanisms of pitting, intergranular, and general corrosion on the AZ31 magnesium alloy were quantified in 3.5 wt.% NaCl immersion and salt spray environments using optical microscopy and laser profilometry to document the changes in the pit characteristics. Although both environments showed similar trends, the immersion environment was more deleterious with respect to intergranular and general corrosion. On the other hand, the salt-spray environment allowed deeper pits to form throughout the entirety of the experiments, which led to a substantial thickness drop (general corrosion) compared with the immersion environment. Next, the complete corrosion model based upon the internal state variable theory was formulated to capture the effects of pit nucleation, pit growth, pit coalescence, and general corrosion. Different rate equations were given for each mechanism. Following the formulation of the model, the aforementioned experimental work and experimental work on four other magnesium alloys (AZ61, AM30, AM60, and AE44), was used to validate the model.

Identiferoai:union.ndltd.org:MSSTATE/oai:scholarsjunction.msstate.edu:td-2216
Date14 December 2013
CreatorsWalton, Christopher Avery
PublisherScholars Junction
Source SetsMississippi State University
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceTheses and Dissertations

Page generated in 0.0019 seconds