This thesis was focused on the possibility of secondary utilization of waste material from the wine industry to remove heavy metals from wastewater. In the theoretical part, there were discussed mainly the problems of heavy metals pollution including methods of their removal and ICP-OES detection. Furthermore, the waste material from the wine production and the possibilities of its further processing were discussed there. The primary objective of the experimental part was to characterize the material by IR analysis, optimization of adsorption conditions, isotherms construction and determination of maximum adsorption capacities of white, red and chemically modified marc for Cd, Cr, Cu, Ni and Pb. From the parameters influencing the adsorption efficiency, the adsorbent load was optimized (m/V ratio = 0,02); pH values found were 5 for Cd, Cu, Ni, Pb and 3 for Cr and the contact time to reach the equilibrium was 15 minutes for Cd, Ni, Pb and 30 minutes for Cr and Cu. Maximum adsorption capacity for heavy metals were calculated from adsorption isotherms by applying the Langmuir model and found to be 18,829 7 mg/g for Cd; 10,664 7 mg/g for Ni; 35,602 0 mg/g for Pb (modified marc with 1M NaOH); 4,678 4 mg/g for Cu and 9,629 0 mg/g for Cr. The results of the work confirm the good adsorption potential of heavy metals on marc and the positive effect of chemical modification of natural biosorbents to improve their adsorption capacity.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:376851 |
| Date | January 2018 |
| Creators | Křikala, Jakub |
| Contributors | Pořízka, Jaromír, Diviš, Pavel |
| Publisher | Vysoké učení technické v Brně. Fakulta chemická |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds