This thesis deals with optimalization processes of adsorption of ferulic acid on different types of sorbents. Specifically, was used the activated carbon as a sorbent of heterogeneous character and Amberlyst A-21 and Amberlit XAD-16 as macroporous polymer sorbents. The ferulic acid is fully characterized in the theoretical part and are discussed the problems of adsorption processes. To determination of the phenolic acid were used UV-VIS and HPLC instrumental methods. The main aim of the experimental part is to optimize various parameters of adsorption, including the construction of adsorption isotherms, determination of maximum adsorption capacity of individual sorbents, study of kinetics and mechanisms of adsorption. Determination of the influence of salt was studied to assess the impact of the inorganic salts on the ferulic acid adsorption capacity. Based on these parameters, was carried out determination of an optimal pH value on 3, with an optimal adsorbent load (m/V ratio = 0,009 gml-1) and a contact time of 50 min for all three adsorbents. Equilibrium studies described by adsorption isotherms and the Langmiur model fitted the best, and the maximum adsorption capacities were determined for all three sorbents with 150,4 mgg-1 for activated carbon, 209,1 mgg-1 for Amberlyst A-21 and 82 mgg-1 for Amberlyte XAD-16. In the study of kinetic models was selected pseudo-second model for all three adsorbents, which correlated with the results obtained by the Langmuir isotherm. The decrease in adsorption capacity in the determination of NaCl influence was 4 % for activated carbon, for macroporous polymer sorbents was decreased by 52 % and 55 % for Amberlyst A-21 and Amberlyt XAD-16 respectively. In a selectivity test under optimized conditions, adsorption strength increased in the order of sinapic acid ferulic acid p-coumaric acid for polymeric sorbent XAD-16 and activated carbon. For the A-21 sorbent the adsorption strength increased in the order of p-coumaric acid ferulic acid sinapic acid. The results of the work indicate the suitability of all three sorbents for the phenolic acid adsorption.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:401937 |
| Date | January 2019 |
| Creators | Bariyeva, Aizat |
| Contributors | Diviš, Pavel, Pořízka, Jaromír |
| Publisher | Vysoké učení technické v Brně. Fakulta chemická |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds