Return to search

Reaktivní zpracování polypropylénu / Reactive Modification of Polypropylene

The theoretical part describes the principles of the free-radical induced grafting and the influence of various parameters on the reactions course. The literature research summarizes the latest knowledge in the field of the reactive modification of polypropylene (PP), it is mainly focused on the PP modification using an unsaturated acid anhydrides. Theoretical part describes the various procedures and modification of technology in order to increase the grafting yield of maleation. The experimental part is determined by the influence of the stabilizers concentration, the peroxide structure, and the binary mixture of monomers on the grafting yield and the reaction course. In the first part, the critical stabilizers concentration was determined based on the experimentally obtained relationship between the grafting yield and the stabilizers concentration. A kinetic schema of grafting of MAH onto PP in the presence of stabilizers has been proposed and compared with the experimental results. The effect of the stabilizers on the extent of the undesirable b-scission was evaluated based on the melt flow rate (MFR) and the rheological curves of PP-g-MAH. In the second part, the effect of the peroxide structure and the concentration of reactants on the grafting yield of PP modification with MAH and itaconic anhydride (IAH) was observed. The initial grafting yield Rg has been experimentally determined and compared with a defined area of theoretical values of Rg. The extent of b-scission was significantly influenced by the structure and the concentration of peroxide, as shown by the results of MFR and the rheological curves of PP-g-MAH. The last part of the doctoral thesis is focused on the assessment of the combination of MAH and IAH as comonomers on the grafting yield. At first, the reference polymers were prepared using the solution polymerization of MAH, and IAH, and copolymerization of MAH with IAH. The reference polymers were analyzed by FTIR, DSC, WAXS to confirm the probable copolymerization of MAH and IAH. The dependence of the reaction enthalpy on the reaction time was observed using simulations of bulk polymerization of MAH, IAH and mixtures MAH and IAH "in situ" in isothermal calorimeter. PP was subsequently modified with a combination of MAH and IAH as comonomers in order to assess its effect on the grafting yield

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:316256
Date January 2017
CreatorsMatláková, Jana
ContributorsŽídek, Jan, Lehocký, Marián, Kučera, František
PublisherVysoké učení technické v Brně. Fakulta chemická
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/doctoralThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0013 seconds