The aim of the master’s thesis is the design of a new music club building in Valtice. The first part of the thesis is the architectural and structural design. The building of irregular rectangular shape with one underground floor and two above-ground floors is divided into two main operational units – a dance hall and a rock club. The chosen structural system is reinforced concrete columns with locally supported floors. The walls are made of sand-lime blocks. The main insulation material is hemp. The building is covered by a flat roof with extensive greenery. The second part deals with the building services. Ventilation, heating and cooling are provided by HVAC units. The heat source is condensing gas boilers, the cooling source is an outdoor VRV cooling unit. The third part of the master‘s thesis is the acoustic assessment of the building. As a noise source, it mainly addresses the acoustic impact on the surrounding buildings in the vicinity. Furthermore, it optimizes the reverberation time in the rock club. The project was produced in accordance with the legal regulations and technical standards and created in AutoCAD software.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:455681 |
Date | January 2022 |
Creators | Svoboda, David |
Contributors | Pilný, Ondřej, Berková, Petra |
Publisher | Vysoké učení technické v Brně. Fakulta stavební |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0014 seconds