Return to search

Quantifying the Lateral Bracing Provided by Standing Steam Roof Systems

One of the major challenges of engineering is finding the proper balance between economical and safe. Currently engineers at Nucor Corporation have ignored the additional lateral bracing provided by standing seam roofing systems to joists because of the lack of methods available to quantify the amount of bracing provided. Based on the results of testing performed herein, this bracing is significant, potentially resulting in excessively conservative designs and unnecessary costs.
This project performed 26 tests with Vulcraft joists in a pressure box to investigate the effects of how many variables influence the lateral bracing provided to joists from standing seam roofing systems, including the variables joist length, panel gauge, clip height, thermal block presence, insulation thickness, and top chord size. Two methods were developed to account for this additional bracing: finite element computer modeling and an application of the Rayleigh-Ritz method called the Column-on-Elastic-Foundation Method.
Variables influencing the pressure at failure, namely chord size and deck gauge, were those with the greatest effect on additional lateral bracing provided from standing seam roof systems. It was determined that higher roof stiffness values and higher failure pressures yield shorter effective lengths.

Identiferoai:union.ndltd.org:UTAHS/oai:digitalcommons.usu.edu:etd-5726
Date01 May 2016
CreatorsSorensen, Taylor J.
PublisherDigitalCommons@USU
Source SetsUtah State University
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceAll Graduate Theses and Dissertations
RightsCopyright for this work is held by the author. Transmission or reproduction of materials protected by copyright beyond that allowed by fair use requires the written permission of the copyright owners. Works not in the public domain cannot be commercially exploited without permission of the copyright owner. Responsibility for any use rests exclusively with the user. For more information contact Andrew Wesolek (andrew.wesolek@usu.edu).

Page generated in 0.0017 seconds