<p>Predmet ovog istraživanja je razvoj nove generacije<br />mineralnih dodataka, dobijenih termičkom i<br />mehanohemijskom aktivacijom kaolinske gline i ispitivanje<br />svojstava kompozita, u kojima je deo portland cementa<br />zamenjen dobijenim pucolanskim materijalima,<br />metakaolinom i amorfnim kaolinom, za različite režime<br />nege. Rezultati su pokazali da su termička i mehanohemijska<br />aktivacija kaolinske gline jednako pogodne metode za<br />dobijanje pucolanskih materijala. Pozitivni efekti na<br />čvrstoće pri pritisku postižu se primenom do 30 %<br />metakaolina u kompozitima pri normalnom režimu nege, a uz<br />dodatno mlevenje, sadržaj metakaolina se može povećati do<br />40 %, uz dodatak CH. Amorfni kaolin se može primeniti u<br />kompozitima, sa stepenom zamene portland cementa do 10 %,<br />pri normalnom i autoklaviranom režimu nege.</p> / <p>The subject of this research is development of a new generation<br />of mineral admixtures, obtained by thermal and<br />mechanochemical activation of kaolin clay, and testing of the<br />properties of the cement based composites, where a part of the<br />portland cement is replaced by pozzolanic materials, metakaolin<br />and amorphous kaolin, for different curing conditions. The<br />results showed that thermal and mechanochemical activation of<br />kaolin clay were equally suitable for obtaining pozzolanic<br />materials. Positive effects on the compressive strength could be<br />achieved by using up to 30 % of MK, and with additional grinding<br />after thermal activation, content of MK could be increased up to<br />40 %, with the addition of CH, under the normal curing<br />conditions. Amorphous kaolin could be used in composites with<br />a cement replacement level of 10 %, under the normal and<br />autoclave curing conditions.</p>
| Identifer | oai:union.ndltd.org:uns.ac.rs/oai:CRISUNS:(BISIS)101461 |
| Date | 22 September 2016 |
| Creators | Ilić Biljana |
| Contributors | Radonjanin Vlastimir, Malešev Mirjana, Grdić Zoran, Radeka Miroslava, Mitrović Aleksandra |
| Publisher | Univerzitet u Novom Sadu, Fakultet tehničkih nauka u Novom Sadu, University of Novi Sad, Faculty of Technical Sciences at Novi Sad |
| Source Sets | University of Novi Sad |
| Language | Serbian |
| Detected Language | English |
| Type | PhD thesis |
Page generated in 0.0028 seconds