In the diploma thesis, an overview of the existing literature focused on the thermoplastic co-extrusion method was worked out and based on the findings, extrusion of the monolayer and homogenous bodies from ZrO2, Al2O3, ZTA a ATZ was studied. For thermoplastic extrusion the capillary rheometer was modified and the nozzle was designed and fabricated. Applying the co-extrusion method, homogenous ceramic rods and monolayer rods in structure core/layer: ZrO2/Al2O3, ZrO2/ATZ and ZTA/Al2O3 were fabricated. In monolayer rods, the interface quality and defects that originate during preparation were evaluated. Technological parameters and properties of homogenous rods were used to rate the structure and defects in monolayer rods. Monolayer rods ZrO2/ATZ and ZTA/Al2O3 with 2.5 mm diameter and 45 mm length (containing small defects) were prepared by thermoplastic co-extrusion.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229830 |
Date | January 2011 |
Creators | Kaštyl, Jaroslav |
Contributors | Cihlář, Jaroslav, Trunec, Martin |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds