Biomass from forestry and agricultural sources has recently drawn a lot of attention as a new source of feedstock for energy and bio products. Size reduction is an important step in preparation of biomass as a feedstock. Each conversion process needs its own specific size or size distribution of particles. Modeling the size reduction process helps to optimize the design and control of the process while ensuring biomass particle sizes for an efficient biofuel conversion process. The objective of this study was to apply the population balance method for modeling the size reduction process. The model was applied to switchgrass size reduction by a grinder. Two population balance parameters, grinding rate (s⁻¹) and breakage distribution function (dimensionless) were estimated using experimental grinding data. The time dependent balance equations were solved using the Euler technique. The accumulation and depletion of the particles belonging to each size category were simulated as a function of time. The simulation predicted the residence time of particles inside the grinder in a way that the ground particles could meet the size and size distribution specifications for the downstream process. The thesis also describes preliminary steps in size reduction. Ground particles were fractionated based on their size by sieving. Weibull distribution was found to be the best probability density function to fit the data.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:BVAU./966 |
| Date | 11 1900 |
| Creators | Jafari Naimi, Ladan |
| Publisher | University of British Columbia |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Format | 932091 bytes, application/pdf |
Page generated in 0.0015 seconds