In this work, the effect of adding short deformable polyvinylalcohol fibers into dimethacrylate resins on mechanical properties of composite materials was investigated. Furthermore, micro- or nano-fillers were added into the matrix. The effect of filler/short fibers combination on mechanical properties of so-called hybrid composites was studied. Composites were characterized by differential compensation photocalorimetry (DPC), termogravimetric (TGA) and dynamic mechanical (DMA) analysis. The fracture surfaces were examined using scanning electron (SEM) and confocal laser (CLSM) microscopy. Elastic modulus and strength, the critical value of stress intensity factor and strain energy release rate and the viscoelastic properties of composite materials were measured. The mechanical properties of composite materials are affected not only by the type of filler/reinforcement, but also by properties of the matrix. These properties also depend on the way of network formation during photo-initiated polymerization. For this reason, heat of polymerization, degree of conversion and the maximum polymerization rate of mixture of dimethacrylate monomers were determined.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:216678 |
| Date | January 2011 |
| Creators | Smrčková, Markéta |
| Contributors | Pavelka,, Vladimír, Poláček, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta chemická |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds