The diploma thesis was dealt with the study of system PP and particular filler, specifically PPH and like a filler was used commercially available CaCO3 (SOCAL P3). This type of filler is declared by the producer as a filler without surface treatment. The submitted thesis had a goal to find and testing the suitable method and methodology for defined surface treatment of the filler. This is the first step for systematic study of influence the various types of adhesive layer on mechanical properties of declared composite. The plasma discharge behind static pressure was used for the surface treatment of the fillers. These fillers were afterwards analyzed by using of sedimentation analysis, infra - red spectroscopy (FT-IR) and scan electron microscopy (SEM). The composites with various volume part of the fillers were prepared in PIB and studied by short-time tests. Regarding to experimental demand there wasn't possible to realize the whole originally intended program i. e. study of influence the different types of adhesive layer, including to form the model for FEM approach. Nevertheless finding and testing the suitable method of surface treatment is completely basic for the others study. The above mentioned method was used in this application for the first time and it is possible to consider this process like an original approach.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:216785 |
| Date | January 2011 |
| Creators | Švestková, Dana |
| Contributors | Krčma, František, Nezbedová, Eva |
| Publisher | Vysoké učení technické v Brně. Fakulta chemická |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds