This dissertation thesis is focused on the analysis of specific cutting forces and accompanying effects during machining of the new materials, composite materials. The experimental part is split up to two main chapters. In the first chapter, the development of specific cutting forces is analyzed in detail when cutting conditions are changing. The experimental machining of glass/polyester and carbon/epoxy composites is described for fibers orientations 0 a 90 (ie, the orientation of the fibers in the feed rate direction and perpendicular to the feed rate direction). The influence of the cutting tool flank wear on the specific cutting force is investigated further. The last section compares the values of specific cutting forces when machining with carbide milling tools deposited by different types of coating. The second chapter describes the measurement of sound spectrums generated by cutting process, sound maps creating and finding possible correlations between dominant frequencies of the sound and the specific cutting forces, or the cutting tool flank wear. The measurements are described for the cases of machining steel 15 260.7 and glass-polyester composite material.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:234228 |
| Creators | Fiala, Zdeněk |
| Contributors | Bach, Pavel, Petrů,, Jana, Píška, Miroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0013 seconds