Return to search

Technologie čistého obrábění kroužku speciálního ložiska bruskou na otvory / Final machining technology of a special bearing ring using a grinder on the holes

The main goal of this thesis is to compare 5 chosen grinding wheels, that vary by the material and structure. The testing is done in the company SLB, spol. s r.o., using a grinder on the holes BDU 80, which is set to 6 different settings of the grinding cycle, defined by the letters A´, A, B, C, D and E. These settings vary by the cutting conditions and enable to compare the tested grinding wheels by 8 measured parameters of the surface quality of the grinded bearing orbits of outer rings of the SLB 84-74 bearings, that are described by the drawing documentation.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:382261
Date January 2018
CreatorsRůžička, Daniel
ContributorsKalivoda, Milan, Chladil, Josef
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.002 seconds