Return to search

Návrh zástavby vodíkové tlakové nádrže na křídlo letounu VUT 001 Marabu / Design of hydrogen pressure tank installation on the VUT 001 Marabu wing

The content of this Master thesis to design installation of hydrogen pressure tanks for airplane VUT RAY 051. Survey was conducted of the available fuel cell on the market. Position of the tank was chosen over the wing using components for mounting a jet engine TJ100 M for aircraft VUT 001 MARABU. For fuel tanks were designed fairings. Further was calculated mass and centre of gravity analysis of aircraft, basic flight performance of aircraft and the drag variation in the location of the tanks above the wing. Further the strain and strength of hinges was calculated.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229318
Date January 2010
CreatorsKoštial, Rostislav
ContributorsJuračka, Jaroslav, Píštěk, Antonín
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.002 seconds