Diploma thesis deals with the design of producing the cover drain. The cover serves to catch impurities while draining liquids. The part is made of 1.4301 stainless steel, using 1-mm thick sheet metal. The size of the annual production series is 30,000 units. As an optimal method of production, progressive cutting and shallow drawing were selected in a combined and a one-purpose tool. Technological and design calculations were performed according to which tools were designed. The LENP 100 press was selected considering the total required pressing force. The cost of one piece production was calculated at 18.91 CZK and the production becomes profitable with annual production higher than 19,478 units per year.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:319250 |
| Date | January 2017 |
| Creators | Hollein, Radek |
| Contributors | Císařová, Michaela, Podaný, Kamil |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds