This thesis describes the design, fabrication, and testing process for a microfluidic phosphate colorimeter utilized for water quality analysis. The device can be powered by, and interfaced for data collection with, a common cell phone or laptop to dramatically reduce costs. Unlike commercially available colorimeters, this device does not require the user to measure or mix sample and reagent. A disposable poly(dimethylsiloxane) (PDMS) microfluid chip, powered by an absorption pumping mechanism, was used to draw water samples, mix the sample at a specific ratio with a molybdovanadate reagent, and load both fluids into an onboard cuvette for colorimetric analysis. A series of capillary retention valves, channels, and diffusion pumping surfaces passively controls the microfluidic chip so that no user input is required. The microfluidic chip was fabricated using a modified SU-8 soft lithography process to produce a 1.67mm light absorbance pathlength for optimal Beer Lambert Law color absorbance. Preliminary calibration curves for the device produced from standard phosphate solutions indicate a range of detection between 5 to 30mg/L for reactive orthophosphate with a linearity of R²=91.3% and precision of 2.6ppm. The performance of the PDMS absorption driven pumping process was investigated using flow image analysis and indicates an effective pumping rate up to approximately 7µL/min to load a 36µL sample.
| Identifer | oai:union.ndltd.org:CALPOLY/oai:digitalcommons.calpoly.edu:theses-1157 |
| Date | 01 August 2009 |
| Creators | Kaylor, Sean C |
| Publisher | DigitalCommons@CalPoly |
| Source Sets | California Polytechnic State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Master's Theses and Project Reports |
Page generated in 0.002 seconds