Tests have been performed to determine whether electromagnetic shielding of fine wires for electrophysiological sensing is a possible way to reduce the external noise in recording of nervous signals. By shielding the wires with a layer of silver, forming a coaxial cable, a reduction of the received power on the lead of 11.8-33 dBm was shown over the 10 – 10 000 Hz range when the test wire was subject to an electromagnetic field from an injection cable. When putting the performance on the interval 50-100 Hz aside the same performance was measured to 25-33 dBm lower received power, which can be explained by 50 Hz noise from the electrical grid interfering with the measurements. However, when the shield was not grounded or grounded through a resistor worse performance was shown. The difference in received power between the unshielded and shielded configuration without grounding the shield was close to 0 dBm. Following this, the type of shielding investigated in this project has the potential to substantially shield thin wires from external interference under the condition that sufficient grounding is provided.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-291457 |
| Date | January 2020 |
| Creators | Mogren, Simon |
| Publisher | KTH, Skolan för kemi, bioteknologi och hälsa (CBH) |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | TRITA-CBH-GRU ; 2020:111 |
Page generated in 0.0022 seconds