The diploma thesis deals with the design of the replacement the Z 143 LSi landing gear with the new VUT 100 type landing gear in a retractable system. The first part of this thesis is devoted to the description of the Z 143 LSi aircraft and its landing gear and the description of the retractable landing gear type VUT 100. The next part describes the possible variants of the installation the VUT 100 landing gear, which are critically evaluated. Then there is selected the final variant for the installation, which is designed in Catia V5 software. The final design includes remotorization with Lycoming IO-390 and new design of engine bed. For the proposed solution, a new mass analysis with the calculation of centrations, new cases of ground load, a new flight envelope of load and additional cases of load of a new engine bed are prepared. The proposed engine bed is analyzed by the finite element calculation method in the MS Patran software. Finally, a possible scheme of the chassis retraction system is proposed.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:417467 |
Date | January 2020 |
Creators | Gregor, Jiří |
Contributors | Vaněk, František, Píštěk, Antonín |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0132 seconds