The main aim of this thesis is the design of an optical wireless link that is transmitted in free space, in the atmosphere. The thesis describes the composition of heads of the atmospheric optical link. One part of this work focuses on the issue of the spread of optical beam in the atmosphere. The facts which have a major impact on the transmission of optical radiation in free space are pointed out here as well. In this work phenomena of absorption, refraction of light, turbulence and dispersion are discussed. Wavelengths spread in the atmosphere with different decline and therefore this thesis provides an analysis of the use of wavelengths between 750 and 1600 nm depending on the meteorological visibility. It describes the basis of the design of AOS through stationary model using power balance equation. It depicts the description of the statistical model, which makes possible to determine the availability on the basis of probability. Current possibilities of AOS are in general described in this work. The practical part of the work is focused on the design of simulation model of transmitter and receiver AOS in the program Pspice. The receiver and transmitter are designed to replace transiver in the media converter. The receiver plays a key role, and therefore big part of the thesis is given to it. Receiver model is composed of a photodiode and of an transimpedance amplifier. The receiver circuit has been tested. The model of transmitter shows the principle of modulating of current, which flows in laser diode. This work does not carried the model of atmosphere, which would serve as a link between the receiver and the transmitter. The circuit of the receiver is subjected to the noise analysis. Parameter NEP and SNR is designed. Link budget is calculated for models of the receivers and the transmitters. The maximum distance of heads is set based on the requirements for a BER error rate which combine this condition. The design of the practical implementation results from the models of transmitters and receivers. Printed circuit boards are designed in EAGLE. Within the frame of this thesis no curcuit diagram is carried out.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:217950 |
| Date | January 2009 |
| Creators | Šporik, Jan |
| Contributors | Dostál, Otto, Filka, Miloslav |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds