The aim of my diploma thesis is to produce an automated workplace for an antenna radiation pattern measurement with the R&S ESCS 30 measurement device. The result is a program named SFMAP.EXE. The measurement process is controlled by this program according to user defined parameters. The program collects the R&S ESCS 30 measured values and can evaluate the radiation angle values of the antenna. It can set up some parameters of the measurement device and controls the rotation of the turn-table, where the measured antenna is positioned. The controlling device based on FT232BL circuit was developed to capacitate the program to control the turn-table. With created program the turn-table can be controlled over the USB interface. This solution allows using any PC or notebook because of its standard equipment - the USB interface.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:217712 |
| Date | January 2008 |
| Creators | Drdla, Karel |
| Contributors | Dřínovský, Jiří, Nováček, Zdeněk |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds