Using Additive manufacturing it is possible to manufacture complicated components, that cannot be manufactured using conventional methods. The typical example is the lattice structure. Fabrication of these structures is complicated, and it is different from the fabrication of bulk parts. Using numerical simulation which can reflect process parameters it is possible to analyze the thermal behaviour of vertical and inclined struts fabrication. Results show that the diameter of struts influences weld track width. This influence is caused by preheating the powder material by previous scanning paths. The final geometry of inclined struts is made in more scanning layers. In this work influence of the start and endpoint of trajectory is described.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:443192 |
| Date | January 2021 |
| Creators | Nosek, Jakub |
| Contributors | Dočekalová, Kateřina, Paloušek, David |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds