In the presented thesis, lead-free Ba(Ti0.8Zr0.2)O3-(Ba0.7Ca0.3)TiO3 (BZT-BCT) thin films were deposited on Pt/TiO2/SiO2/Si substrates using chemical solution deposition method and then the effect of process parameters were investigated to obtain optimum parameters of these lead-free thin films. The phase was selected near to the morphotropic phase boundary (MPH) to increase the number of polarization directions where rhombohedral and tetragonal phases exist together.
In this study, the effect of sintering temperatures on microstructure, dielectric and ferroelectric properties were studied systematically. Among the various high-quality BZT-BCT thin films with uniform thickness, the optimum dielectric and ferroelectric responses were observed for films annealed at 800 oC for 1 h sintering time. The thickness was kept constant for all measurements as 500 nm (triple layered films). Therefore, the average grain sizes were found around 60 nm for samples sintered at 700,750 and 800 oC.
BZT-BCT thin films sintered at 800 oC showed effective remnant polarization and coercive field values of 2.9 µ / C/cm2 and 49.4 kV/cm, together with a high dielectric constant and low loss tangent of 365.6 and 3.52 %, respectively, at a frequency of 600 kHz due to pure perovskite phase showing full crystallization and minimum surface porosity obtained at this temperature.
| Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/12614623/index.pdf |
| Date | 01 October 2012 |
| Creators | Celtikci, Baris |
| Contributors | Ozenbas, Ahmet Macit |
| Publisher | METU |
| Source Sets | Middle East Technical Univ. |
| Language | English |
| Detected Language | English |
| Type | M.S. Thesis |
| Format | text/pdf |
| Rights | To liberate the content for METU campus |
Page generated in 0.0014 seconds