This diploma thesis deals with bonded hybrid joints which are used for connecting parts of modern coachwork. Firstly, the thesis describes in general the process of production of the whole coachwork, from cutting of the blanks to the surface treatment including the analysis of the used materials. Subsequently, the problem of joining body parts through adhesives, but also by welding, soldering or other methods is discussed. Another part of this thesis is dedicated to an experiment in which the qualities of bonded hybrid joints were determined. Different ways of realizing the joint have been made which differed in the size of the glued surface, in the welding methods and in the process of their creation. The produced joints were tested for their strength and quality.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:382110 |
Date | January 2018 |
Creators | Ševčík, Jan |
Contributors | Hanáčková, Pavla, Kubíček, Jaroslav |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds