Return to search

Análise da influência da rigidez das ligações viga-pilar no comportamento estrutural de edifícios de múltiplos pavimentos em concreto armado / Analysis of the influence of the stiffness of beam-column connections on the structural behavior of reinforced concrete buildings with multiple floors

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Conventional structural analysis of buildings in reinforced concrete is performed considering
beam-column connections as rigid. However, experimental results prove the existence of
relative rotations in beam-column connections of reinforced concrete structures, showing the
partial transfer of bending moment. In this study the influence of the stiffness of beam-column
connections on the structural behavior of multi-storey buildings in reinforced concrete was
investigated. On a first stage, the value of the rotation restriction of connections was varied,
observing the impact on horizontal displaceability of the structure, on the γz coefficient, on the
negative and positive moments of the beams and on the longitudinal reinforcement of the
pillars. This analysis was performed for buildings with 05, 10, 15 and 19 floors. The results
show that the reduction of the rotation restriction of connections increases the values of the
horizontal displacements, of the γz coefficient, of the positive moments and of the
reinforcement of the pillars. The increases that occur on the values of the analyzed parameters
become larger as the number of floors of buildings increases. On a second stage, the same
building was calculated with rigid connections and deformable connections. In order to
determine the factor αR of deformable connections, two analytical models available in literature
were used, and a comparison between the results obtained by each analytical model was also
performed. Based on the results, it is concluded that neglecting the influence of the stiffness of
the beam-column connections on the analysis of monolithic reinforced concrete structures may
result in different solutions compared to the real behavior of the structure. The stiffness values
obtained with the analytical models that were used differ considerably from the condition of
rigid connections, suggesting an adjustment on the standard consideration of rigid connections
adopted by the computer programs of structural calculation. / A análise estrutural convencional de edificações em concreto armado é realizada considerando
as ligações viga-pilar como rígidas. Entretanto, resultados experimentais comprovam a
existência de rotações relativas nas ligações viga-pilar de estruturas de concreto armado,
evidenciando a transmissão parcial de momento fletor. Neste trabalho foi investigada a
influência da rigidez das ligações viga-pilar no comportamento estrutural de edificações de
múltiplos pavimentos em concreto armado. Em uma primeira etapa, variou-se o valor de
restrição à rotação das ligações observando os impactos na deslocabilidade horizontal da
estrutura, no coeficiente γz, nos momentos negativos e positivos das vigas e nas armaduras
longitudinais dos pilares. Esta análise foi realizada para edificações com 05, 10, 15 e 19
pavimentos. Observou-se por meio dos resultados que a redução da rigidez à rotação das
ligações provoca aumento nos valores dos deslocamentos horizontais, do coeficiente γz, dos
momentos positivos das vigas e das armaduras dos pilares. Os acréscimos ocorridos nos valores
dos parâmetros analisados são maiores à medida em que se aumentam o número de pavimentos
das edificações. Em uma segunda etapa, calculou-se uma mesma edificação com ligações
rígidas e com ligações deformáveis. Para determinação da restrição à rotação das ligações
deformáveis, utilizaram-se dois modelos analíticos disponíveis na literatura, realizando-se,
também, uma comparação entre os resultados obtidos pelos modelos. Com base nos resultados,
conclui-se que negligenciar a influência da rigidez das ligações viga-pilar na análise de
estruturas monolíticas em concreto armado pode gerar soluções muito diferentes do
comportamento real da estrutura na prática. Os valores de rigidez obtidos pelos modelos
analíticos utilizados divergem consideravelmente da condição de ligações rígidas, sugerindose
a adequação na consideração padrão de ligações rígidas adotada pelos programas
computacionais de cálculo estrutural. / Mestre em Engenharia Civil

Identiferoai:union.ndltd.org:IBICT/urn:repox.ist.utl.pt:RI_UFU:oai:repositorio.ufu.br:123456789/14230
Date25 April 2016
CreatorsSantos, Júlia Borges dos
ContributorsAlva, Gerson Moacyr Sisniegas, Silva, Turibio José da, Delalibera, Rodrigo Gustavo, Silva, Wellington Andrade da
PublisherUniversidade Federal de Uberlândia, Programa de Pós-graduação em Engenharia Civil, UFU, BR, Engenharias
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Formatapplication/pdf
Sourcereponame:Repositório Institucional da UFU, instname:Universidade Federal de Uberlândia, instacron:UFU
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0029 seconds