<p> Tuned Liquid Dampers (TLDs) are increasingly being used to suppress the dynamic vibration of tall buildings. An equivalent mechanical model is essential for rapid analysis and design of a TLD. The most common TLD tank geometries are circular, annular and rectangular. Rectangular tanks are utilized for 1-D and 2-D TLDs, whereas circular and annular are usually applied to axisymmetric structures. The amount of fluid that participates in the sloshing motion is directly influenced by the tank geometry. Although not commonly used, a TLD having a curved-bottom tank is expected to perform more effectively due to its relatively large value of effective mass. The main objective of this study is to develop mechanical models for seven TLDs with different tank geometries including the curved-bottom case, and to theoretically investigate the performance of rectangular, vertical-cylindrical and horizontal-cylindrical TLDs.</p> <p> Potential flow theory, linear long wave theory, Lagrange's equations and virtual work method are employed to develop the equivalent mechanical model parameters of TLDs with rectangular, vertical-cylindrical, horizontal-cylindrical, hyperboloid, triangular, sloped-bottom, and parabolic tank geometries. A rectangular, vertical-cylindrical and horizontal-cylindrical TLD are selected for further study using a single-degree-of-freedom
(SDOF) model and a two degree of freedom structure-TLD system model applying the derived equivalent mechanical parameters.</p> <p> The dynamic characteristics of the TLDs as a SDOF system are investigated. The mechanical model is verified by comparing calculated values with experimental results for a rectangular TLD. The free surface motion, sloshing force and energy dissipation are found to be dependent upon the excitation amplitude. Analytical results also indicate that the horizontal-cylindrical TLD possesses the greatest normalized sloshing force and energy dissipation among the TLDs considered.</p> <p> The performances of various TLDs installed in a structure are studied in terms of effective damping, efficiency and robustness. Tuning ratio, structural response amplitude, mass ratio and liquid depth are adjusted to investigate their affect on the performance of the studied TLDs. Performance charts are developed and subsequently used to present the results. It is found that small liquid depth ratio and large mass ratio can lead to a robust structure-TLD system with small relative motion ratio between the structure and the vibration absorber. Comparisons of performance between the three TLDs are made and it can be concluded that the horizontal-cylindrical TLD is the most robust and effective device with the smallest relative motion ratio.</p> / Thesis / Master of Applied Science (MASc)
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/21758 |
| Date | 04 1900 |
| Creators | Deng, Xiaocong |
| Contributors | Tait, Michael J., Civil Engineering |
| Source Sets | McMaster University |
| Language | en_US |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0021 seconds