The thesis deals with the design of the upper part of the gas tank. Taking into account the shape and dimensions, the solution was chosen the most advantageous drawing technology without a thinning of 1 mm thick DC04 steel. The solution took account of the requirements of the contracting authority and selected the production for one operation. However, the simulation proved inappropriateness of the solution, so the procedure was modified to two operation proces. At the first stroke, a larger part of the body will be created, and in the other, a calibration of the cut-out dimensions will occur. For the first operation, the design of the tool kit, including drawing documentation for the CTH 250 press, was elaborated.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:316912 |
Date | January 2017 |
Creators | Minář, Martin |
Contributors | Staněk, Vojtěch, Podaný, Kamil |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds