Return to search

Crystallization of Lithium Disilicate Glass Using Variable Frequency Microwave Processing

The lithium disilicate (LS2) glass system provides the basis for a large number of useful glass-ceramic products. Microwave processing of materials such as glass-ceramics offers unique benefits over conventional processing techniques. Variable frequency microwave (VFM) processing is an advanced processing technique developed to overcome the hot spot and the arcing problems in microwave processing. In general, two main questions are addressed in this dissertation:

1. How does microwave energy couple with a ceramic material to create heat? and,
2. Is there a "microwave effect" and if so what are the possible explanations for the existence of that effect?

The results of the present study show that VFM processing was successfully used to crystallize LS2 glass at a frequency other than 2.45 GHz and without the aid of other forms of energy (hybrid heating). Crystallization of LS2 glass using VFM heating occurred in a significantly shorter time and at a lower temperature as compared to conventional heating.

Furthermore, the crystallization mechanism of LS2 glass in VFM heating was not exactly the same as in conventional heating. Although LS2 crystal phase (Orthorhombic Ccc2) was developed in the VFM crystallized samples as well as in the conventionally crystallized samples as x-ray diffraction (XRD) confirmed, the structural units of SiO4 tetrahedra (Q species) in the VFM crystallized samples were slightly different than the ones in conventionally crystallized samples as the Raman spectroscopy revealed.

Moreover, the observed reduction in the crystallization time and apparent temperature in addition to the different crystallization mechanism observed in the VFM process both provided experimental evidence to support the presence of the microwave effect in the LS2 crystallization process.

Also, the molecular orbital model was successfully used to predict the microwave absorption in LS2 glass and glass-ceramic. This model was consistent with experiments and indicated that microwave-material interactions were highly dependent on the structure of the material.

Finally, a correlation between the Fourier transform infrared reflectance spectroscopy (FTIRRS) peak intensities and the volume fraction of crystals in partially crystallized LS2 glass samples was established. / Ph. D.

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/27478
Date04 May 2007
CreatorsMahmoud, Morsi Mohamed
ContributorsMaterials Science and Engineering, Clark, David E., Viehland, Dwight D., Suchicital, Carlos T. A., Pickrell, Gary R., Lu, Guo-Quan
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
Detected LanguageEnglish
TypeDissertation
Formatapplication/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/
RelationMorsidissertationfinal3.pdf

Page generated in 0.0015 seconds