Full scale lateral load tests were performed on five piles located at various distances behind MSE walls. Three of the five test piles were production piles used to support bridges, and the other two piles were located behind a MSE wing walls adjacent to the bridge abutment. The objective of the testing was to determine the effect of spacing from the wall on the lateral resistance of the piles and on the force resisted by the MSE reinforcement. Tentative curves have been developed showing p-multiplier vs. normalized spacing behind wall for a length to height ratio of 1.1 and 1.6. The data suggest that with a L/H ratio of 1.6, a p-multiplier of 1 can be used when the normalized distance from the back face of the MSE wall to the center of the pile is at least 3.8 pile diameters. When the L/H ratio decreases to 1.1 a p-multiplier of 1 can be used when the pile is at least 5.2 pile diameters behind the wall. A plot showing the induced load in the reinforcement as a function of distance from the pile has been developed. The data in the plot is normalized to the maximum lateral load and to the spacing from the wall to the pile. The best fit curve is capped at a normalized induced force of approximately 0.15. The data show that the induced force on the reinforcement when a lateral load is applied to the piles decreases exponentially as the normalized distance from the pile increases. The plot is limited to the conditions tested, i.e. for the reinforcement in the upper 6 ft. of the wall with L/H values ranging from 1.1 to 1.6.
| Identifer | oai:union.ndltd.org:BGMYU2/oai:scholarsarchive.byu.edu:etd-4743 |
| Date | 07 August 2012 |
| Creators | Price, Jacob S. |
| Publisher | BYU ScholarsArchive |
| Source Sets | Brigham Young University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Theses and Dissertations |
| Rights | http://lib.byu.edu/about/copyright/ |
Page generated in 0.0016 seconds