This diploma theses deals with possibilities of using numerical simulation for optimizing production of highly demanding thin-section casting produced by investment casting process. The casting made of aluminium alloy in which the manufacturing process was very problematic (occurrence of macro and micro shrinkages) has been chosen. By numerical simulation the existing technology has been analysed and based on this the possible reasons for defects found. This was later confirmed also by metallographic examinations. Following to this several options for a new technology were proposed and again by simulation checked their suitability. By comparing all above mentioned options two versions have been chosen in the end which was later tested in production with satisfactory results.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:228936 |
Date | January 2010 |
Creators | Mikulka, Vít |
Contributors | Vašťák, Patrik, Horáček, Milan |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0015 seconds