Impact induced dynamic cracks are produced with a Split Hopkinson Pressure Bar (SHPB) apparatus in two rocks (Kuru granite and Flamboro limestone) with impact velocities ranging from 8 to 12 m/s. Impact bit (tungsten carbide) diameters range from 8mm to 15mm. Dye impregnation combined with UV imaging, CAT scans and Optical scans were employed to study the resulting crack patterns. The resulting damage is quantified in terms of radial crack density on impact surface, crater, crushed zone and crack density with depth. In both rocks ‘total’ damage obtained is directly proportional (exponential) with bit diameter and impact velocity. The ‘total’ damage in Kuru granite is found to be greater than Flamboro limestone at all impact velocities; however, the crushed zone in the latter is found to consistently greater than the former. 2D simulations of dynamic fractures with AUTODYN have also been carried out showing good qualitative agreement with experimental results.
Identifer | oai:union.ndltd.org:TORONTO/oai:tspace.library.utoronto.ca:1807/43266 |
Date | 05 December 2013 |
Creators | Nariseti, Chanakya |
Contributors | Mohanty, Bibhu |
Source Sets | University of Toronto |
Language | en_ca |
Detected Language | English |
Type | Thesis |
Page generated in 0.0083 seconds